User Manual

4. Installation Guide

1. Connect to the AC power source via back panel connector and the USB cable to the

USB port on your computer. The guest operating system will recognize the new HID

compliant device (MP8d).

2. Download and install the MP8d software control panel from www.antelopeaudio.com/en/

support/downloads This will enable you to control your device from your computer and

select all necessary settings.

3. Open your control panel by double-clicking the icon and follow the device activation

procedure.

4. Connect your choice of inputs and outputs to MP8d.

Note: Make sure your device has the most recent rmware installed. Check this by

selecting the Options panel and clicking on the Firmware Update button. See picture: