User Manual

4. Front Panel Explained

1. Power Switch

Toggles standby / operation state. When the device is powered on an illuminated ring will

glow arround the power button.

2. WC LOCK Indicator

Will indicate if the 10MX is locked to an external source.

3. Atomic Clock Indicator

Indicates that if the Atomic Module is engaged and Warmed up. When the device is

powered this icon will pulsate during the warm-up state as the Rubidium Oscillator is

heating up. When the device is fully warmed up the LED will glow steadily.

4. Sample Rate Indicator

Indicated the current sample rate of the master clock. When using DA mode, the

indicator blinks if no source is present.

5. Sample Rate Selection Knob

Use to cycle thru the sample rates, click to select the sample rate of your choice.

Press and hold to enter/exit DA mode