User Manual
7
1. Safety Notes
To reduce the risk of electrical shocks, re, and related hazards:
● Do not remove screws, cover, or cabinet. There are no user serviceable parts inside.
Refer servicing to qualied service personnel.
● Do not expose this device to rain, moisture or spillover of liquid of any kind.
● Should any form of liquid or a foreign object enter the device, do not use it. Switch off the
device and then unplug it from the power source. Do not operate the device again until the
foreign object is removed or the liquid has completely dried and its residues fully cleaned
up. If in doubt, please consult the manufacturer.
● Do not handle the power cables with wet hands!
● Make sure the device is switched off when plugging/unplugging it to/from the power
source.
● Avoid placing things on the cabinet or using the device in a narrow and poorly ventilated
place which could affect its operation or the operation of other closely located components.
● If anything goes wrong, turn off the device rst and then unplug the power. Do not attempt
to repair the device yourself. Consult authorized service personnel or your dealer instead.
● Do not install near any heat sources such as radiators, stoves, or other apparatus
(including ampliers) that produce heat.
● Do not use harsh chemicals to clean your unit. Clean only with specialized cleaners
for electronics equipment.
● Connect all your devices before powering your unit.
● This unit is connected via its power cord to the mains safety earth.
● Never operate the unit without this earth connection.
● DC power supply cable should be routed so that it is not likely to be walked on
or squeezed by items placed upon or against it.
● To completely turn off the device, unplug the power cable rst from the outlet and then
from the rear panel of the unit.
● Both occasional and continued exposure to high sound pressure levels can cause
permanent ear damage via headphones and monitors.
● Your unit should always be un-racked when traveling or in a ight case.
● The device is designed to operate in a temperate environment, with a correct Operating
Temperature of 0-50° C, 32-122° F
● Attention! During the rmware update we advise to disconnect every other device
from your Antelope unit except the computer.