User Manual
29
DAW
● What buffer size is your DAW set to?
● If it is signicantly low i.e. lower than 128 samples in your buffer size, try increasing it.
Try increasing the buffer size from the Goliath control panel (Windows Only)
● Have you checked the input and output routing is correct in your DAW?
● Is the Goliath device selected in the relevant sound card section of the DAW’s preferences?
If the Goliath doesn’t show up in you DAW, rst try unplugging and plugging back the
Thunderbolt
TM
cable (or the USB cable), then restarting your Computer and nally re-install the
rmware, drivers and control panel for the Goliath.