User’s Manual Manuel de l’utilisateur Manual del usuario SLK2600AMB Super Mini Tower Case Boîtier Super Mini Tour Super Mini Tower Case
Disclaimer This manual is intended only as a guide for Antec's Computer Enclosures. For more comprehensive instructions on installing your motherboard and peripherals, please refer to the user's manuals which come with your components and drives. SLK2600AMB - Super Mini Tower Case Power Supply The power supply installed in this case comes with a main power switch. Make sure you turn the switch to the ON ( I ) position before you boot up your computer for the first time.
2. 3. 4. 5. 6. 7. Make sure you have the appropriate I/O panel for your motherboard. If the panel provided is not suitable for your motherboard, please contact your motherboard manufacturer for the correct I/O panel. Line up motherboard with the standoff holes, determine which ones line up, and remember where they are. Not all motherboards will match with all of the provided screw holes, and this is not necessary for proper functionality. (In other words there will likely be extra holes.
Attaching the screwless Drive Rails. Figure 1. Figure 2. Data Cable Connection After you have connected the devices to the power supply, you need to connect the data cables between the devices and the motherboard. The data cables are not included with the case; we include this information only as an aid. 1. For hard drives and CD-ROM's, use the 40-pin IDE ribbon cables. For floppy drives, use the 34-pin floppy ribbon cables.
