User manual

The P280 comes with six preinstalled motherboard standoffs. These are positioned for Standard

ATX motherboards but can be relocated to accommodate other form factors.

1. Align the motherboard with the

standoff holes on the motherboard tray

and remember or mark which holes are

lined up

2. Install standoffs as needed and put the

motherboard in.

Install the motherboard standoffs by aligning the

motherboard with the standoff holes.

CAUTION

Make sure to remove any unused motherboard standoffs. They

may come into contact with the back of the motherboard and

may electrify your chassis exterior if left connected.

3. Screw your motherboard into the standoffs with the provided motherboard mounting

screws.

Use the provided motherboard mounting

screws to secure your motherboard into the

standoffs.