User manual

Put the case upright on a flat,

stable surface so that the rear

panel (power supply and expansion

slots) is facing you. To remove the

left and right side panels, remove

these thumbscrews first.

Note: Place the panel thumbscrews

aside carefully and remember

where they are.

Remove the panel by gripping the

end of the panel at the top &

bottom and swinging the panel

outward. Do not pull the panel

back toward the rear of the chassis.

Remove the panel by the end of the panel at the top &

bottom and swing the panel outward.

CAUTION: Do not use your fingernails to pry or lift the panels. Damage to the panels or injury to

your fingernails may result.

Before proceeding:

Check the manual for your CPU cooler to find out if there are steps you must do before

installing the motherboard.

Make sure you have the correct I/O panel for your motherboard. If the panel provided with the

chassis isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel.

Make sure you have the correct I/O panel.