NSK 4000 II / NSK 4480 II / NSK 4480B II User’s Manual
Table of Contents Introduction 1.1 Case Specifications………………...……………......………….....… 2 1.2 Diagram……………………………………………....…......…….....… 2 Hardware Installation Guide 2.1 Setting Up……….…......…................................….................. 2.2 Motherboard Installation……………………………….......….....…. 2.3 3.5” Device Installation…………………………….….........…........ 2.4 5.25” Device Installation……………….…….....…...................... 3 3 3 4 Connecting the Front I/O Ports 3.1 USB 2.0 Ports……………………………...……........……….
At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec’s Computer Enclosures.
1.1 Case Specifications Case Type Mini Tower Color Silver and Black / All Black Dimensions 16.9” (H) x 7.9” (W) x 16.5” (D) 430mm (H) x 200mm (W) x 420mm (D) Weight 15 lbs / 6.82 kg Cooling 1 x Rear 120mm TriCool™ 3-speed fan 1 x Front mount for optional 80mm fan 1 x Advanced Chassis Air Guide, with mount for optional 80mm fan Drive Bays 8 Drive Bays: - External 3 x 5.25” bays - External 2 x 3.5” bays - Internal 3 x 3.
Hardware Installation Guide This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult the motherboard manual for specific mounting instructions and troubleshooting. Before proceeding, check the manual for your CPU cooler to find out if there are steps you must take before installing the motherboard. While installing hardware, keep your case on a flat, stable surface. 2.1 Setting Up 1. Take the case out of the box. Remove the styrofoam and plastic bag. 2.
. Connect the appropriate connector(s) from the power supply to the hard drive(s). 2.4 5.25” Device Installation There are three external 5.25” drive bays. 1. Looking from the rear of the case you can see metal grills covering the 5.25” drive bays. Carefully push a screwdriver through the metal grill and gently push the plastic drive bay cover outwards until it comes off. 2. Using your hands, twist the metal plate back and forth until it breaks off.
3.2 AC’97/HD Audio Ports There is an Intel® standard 10-pin AC’97 connector and an Intel® 10-pin HDA (High Definition Audio) connector linked to the front panel of the case.
3.4 Rewiring Motherboard Header Connectors There may come a time when you need to reconfigure the pinout of a motherboard header connector. Examples could be for your USB header, audio input header, or some other front panel connector such as the Power Button connector. Before performing any work, please refer to your motherboard manual or your motherboard manufacturer’s website to be sure of the pin-out needed for your connector.
Speed (RPM) Input Current Air Flow Static Pressure Noise Input Power High 2000 0.24A (max.) 2.24 m³ / min (79 CFM) 2.54mm-H2O (0.10inch-H2O) 30 dBA 2.9 W Medium 1600 0.2A 1.59 m³ / min (56 CFM) 1.53mm-H2O (0.06inch-H2O) 28 dBA 2.4 W Low 1200 0.13A 1.1 m³ / min (39 CFM) 0.92mm-H2O (0.04inch-H2O) 25 dBA 1.6 W 4.2 Front 80mm Intake Fan An optional 80mm fan can be installed to pull air in at the bottom front of the case. A mounting bracket is provided for this purpose. 1.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2009 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners.
