User manual

10
The NINETEEN HUNDRED comes with 9 preinstalled motherboard standoffs. These are positioned for
Standard ATX motherboards but can be relocated to accommodate other form factors.
1. Align the motherboard with the
standoff holes on the motherboard tray and
remember or mark which holes are lined up
2. Install standoffs as needed and put the motherboard
in.
3. Screw your motherboard into the standoffs with the provided motherboard mounting screws.
Install the motherboard standoffs by aligning the motherboard with
the standoff holes.
CAUTION
Make sure to remove any unused motherboard
standoffs. They may come into contact with the back of
the motherboard and may electrify your chassis
exterior if left connected.
Use the provided motherboard mounting screws to secure your
motherboard into the standoffs.