NeoPower™ 430/500/550/650 User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ
User’s Manual NeoPower™ 430/500/550/650 High efficiency modular power supply This manual covers the entire family of NeoPower power supply units (PSU). This line of PSU has increased output power distribution. The NeoPower (except the NeoPower 430) features ATX12V version 2.2/ EPS12V specifications to match the newest Intel® and AMD processor requirements. Furthermore, it includes three +12V outputs that deliver safer and more reliable power to your system’s components.
Installation: 1. Install the NeoPower® PSU into your case with the four screws provided. 1 2. Connect the 24-pin Main connector to your motherboard.
3. Connect the 4-pin (3a) or 8-pin (3b) connector for the CPU. 3b 3a Note: Please also refer to your motherboard user guide for any special instructions. 4. Connect the cables from cable pack to the socket on the power supply as needed. If you are using the PCI Express cables, make sure that the end of the cable labeled PCI-E is plugged into the video card, not the PSU. 4 5. Connect the AC power cord to the power supply AC inlet and turn the switch to “I” position.
Parts List: Quantity 1 Picture Part Name NeoPower power supply Description Includes 24-pin main connector, 8-pin +12V connector (except 430) and a 4-pin +12V Connector. (NeoPower 650 has a 6+2 PCI-E.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2007 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners.
