OVERTURE II User’s Manual
At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec's Computer Enclosures.
5. Screw the brass standoffs into the threaded holes that line up with your motherboard. Do not overtighten the standoffs. Some standoffs may be pre-installed for your convenience. 6. Place your motherboard on the brass standoffs. 7. Screw in your motherboard to the standoffs with the provided Philips-head screws. Your motherboard is now installed. CONNECTING THE POWER AND LED The power supply conforms to the latest ATX12V Version 2.0 standard.
1 9 2 Intel Standard USB Header Pin Layout Signal Names Pin Pin Signal Names 1 USB Power 1 2 USB Power 2 3 Negative Signal 1 4 Negative Signal 2 5 Positive Signal 1 6 Positive Signal 2 7 Ground 1 8 Ground 2 9 Key (No Pin) 10 Empty Pin 10 CONNECTING THE IEEE 1394 (FIREWIRE®, I.LINK®) PORT You will find a single 10-pin connector on a cable attached to the front IEEE 1394 connection.
6. Rear Right Speaker Out Pin: Connect the RET-R connector to this pin. 7. Rear Left Speaker Out Pin: Connect RET-L connector to this pin. INSTALLING 3.5" DEVICES There are two 3.5" external drive bays on the front bezel. The drive bays are right above the power supply, and are fastened by two screws. These drive bays also come with hard drive mounting holes. You can mount your hard drives to these bays if you choose to. Remove the screws and slide the drive cage out. 1.
or Low to a fan-control device may result in the fan not being able to start. The already lowered voltage from the fan control device will be further reduced by the TriCool circuitry below 5V. Specifications: Size: 92 x 92 x 25.4 mm Rated Voltage: DC 12V Operating Voltage: 10.2V ~ 13.8V Speed Input Current Air Flow Static Pressure Acoustical Noise Input Power High 2200 RPM 0.24A (Max.) 1.08 m³/min. (38 CFM) 1.04 mm-H2O (0.08 inch-H2O) 27 dBA 1.4 W Medium 1600 RPM 0.1A 1.09m³/min. (28 CFM) 0.
1 2a 2b 19 18 3 5 4 17 6 16 15 7 9 14 13 8 12 11 10 Overture II - Explorer Description No Descriptions 1 Top Panel with Ventilation 2a Normal Expansion Slot Cover 2b Ventilated PCI Slot Covers 3 Internal 3.5" Drive Cage 4 Power Connector 5 92mm TriCool Fan 6 Universal I/O Panel 7 7530mm Blower Fan Mount Cage 8 7530mm Blower Fan Set 9 External 5.25" Drive Cage 10 Front Bezel 11 5.25" Drive Bay Cover 12 Power Button 13 Reset Button 14 3.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands Tel: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 Technical Support US & Canada 1-800-22ANTEC CustomerSupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2005 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners.
