TM Fusion Remote Max User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ Ё᭛Փ⫼ݞ Media Components
At Antec, we continually refine and improve our products to ensure the highest quality. As such, it’s possible that your new case may differ slightly from the description in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec’s Computer Enclosures.
1. 2. 3. 4. 5. 6. 7. Lay the case down, with the top open. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel. Line up your motherboard with the standoff holes, and remember which holes are lined up. Not all motherboards will match with all the provided holes; this is normal and won’t affect functionality. Remove your motherboard by lifting it up.
the 10-pin connector to the motherboard headers so that the blocked pin fits over the missing header pin. Note: Please check the motherboard manual for the USB header pin layout and make sure it matches the following table.
Pin Assignment for Audio Ports (HDA and AC’97) 10 6 4 2 97531 Pin Signal Names (HDA) Pin Signal Names (AC’97) 1 MIC2 L 1 MIC In 2 AGND 2 GND 3 MIC2 R 3 MIC Power 4 AVCC 4 NC 5 FRO-R 5 Line Out (R) 6 MIC2_JD 6 Line Out (R) 7 F_IO_SEN 7 NC 8 Key (no pin) 8 Key (no pin) 9 FRO-L 9 Line Out (L) 10 LINE2_JD 10 Line Out (L) Locate the internal audio connectors from your motherboard or sound card. Consult your motherboard or sound card manual for the pin-out positions.
c. Navigating iMEDIAN HD Use the 4-way buttons to navigate iMEDIAN HD. Holding the left and right buttons will take you to the “Home” and “Menu” screens d. Local Media Users can easily enjoy music, videos, and pictures on their PC by using just the remote control. IMEDIAN HD supports every essential internal codec. e. Network Media Users can easily enjoy media files on other local PCs as well as Internet radio. f. CD/DVD Users can listen to CDs or watch DVDs g.
3. Find a 4-pin molex or SATA connector on the power supply and connect it to the power connector on the device. The Cable Management There is a cable management compartment under the 5.25” flip-up cage. Remove the cage to expose the compartment. Hide or route your excess cables to this compartment. Secure excess cables with the reusable cable ties as needed. Cooling System The 120mm TriCool™ fan The Fusion Remote Max comes with a 120mm TriCool™ rear exhaust fan located in the motherboard chamber.
Note: The minimum voltage to start the fan is 5V. We recommend our users to set the fan speed to High if you choose to connect the fan to a fan control device. A fan-controller regulates the fan speed by varying the voltage to it. The voltage may start as low as 4.5V to 5V. Connecting a TriCool™ fan set on Medium or Low to a fan-control device may result in the fan not being able to start.
The Washable Air filters There are two filters located behind the front bezel door. 1. Flip down the front bezel door. 2. Push to release one of the filters from its holding position 3. Wash the filter with water. 4. Insert the filter back to its original position until it clicks. From time to time it will be necessary to wash the installed air filters. Not washing the air filter will result in higher system temperatures and possible stability problems.
RM200 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Application Exit: Close the active window or close iMEDIAN HD [ALT + F4] Power: Turn the PC on/off (Power switch also located on the internal receiver) Record Media Control Group 1: Play/Pause/Stop/Open/Prev/Next/Rew/F.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2008 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners.
