ARIA_Int_Manual.
ARIA_Int_Manual.qxd 2/27/2004 2:50 PM Page 6 At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. 4. Disclaimer This manual is intended only as a guide for Antec's computer enclosures.
ARIA_Int_Manual.qxd 2. 2/27/2004 2:50 PM Page 8 standard. If you're unsure of your motherboard's layout, please contact technical support at your motherboard's manufacturer. Connect the 5-pin USB connector so that the red wire is on Pin 1 (Power, or +5V). The second header may be reversed (Power pin at the opposite end of the row) so be careful when you plug in both connectors. 8-in-1 Card Reader/Writer The card reader/writer includes an internal high-speed (480Mbps) USB 2.
ARIA_Int_Manual.qxd 3. 4. 5. 6. 7. 2/27/2004 2:50 PM Page 10 Ground Pin: Connect the AUD GND connector to this pin. Front Right Speaker Out Pin: Connect the FPOUT-R connector to this pin. Front Left Speaker Out Pin: Connect the FPOUT-L connector to this pin. Rear Right Speaker Out Pin: Connect the RET-R connector to this pin. Rear Left Speaker Out Pin: Connect RET-L connector to this pin Note: Your motherboard may not support rear speaker output.
