User manual

User Manual
W-101 Bubble Machine
Congratulations on the purchase of your new
ANTARI W-Series bubble MACHINE.
Thank you for choosing an ANTARI W-Series Bubble Machine. You now own a
rugged and powerful state-of-the-art bubble machine. Prior to use, we suggest
that you carefully read all of the instructions. By following the suggestions
found in this user manual, you can look forward to the reliable and satisfactory
performance of your ANTARI Bubble Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a
long and safe life for your Antari bubble machine.
Risk of electric shock. Disconnect the appliance from the electric
supply before refilling liquid, cleaning or performing maintenance on
the machine.
Do not overfill your bubble machine. Overfilling will cause the unit to leak.
Danger of Electric Shock
Keep this device dry.
Keep the bubble machine upright.
For the 110V models, use 3-prong grounded electrical outlet only. Prior to
use take care to determine that the unit is installed at the rated voltage.
Turn off or unplug when not in use.
The power plug needs to be clearly seen by user when installed on the wall.
This machine is not water-proof or splash-proof . If moisture, water, or any
liquid gets inside the housing, immediately unplug the unit and contact a
service technician or your dealer before using it again.
No user serviceable parts inside. Refer to your Antari dealer or other
qualified service personnel.
Introduction
CAUTION:
Pay attention to all warning labels and instructions printed on the
exterior of your Antari W-101 Bubble Machine