Product guide

12
11
▪ FLR-5 Light Fog Liquid
▪ FLG-5 Heavy Fog Liquid
▪ W-515 Effect
▪ W-530 Effect
▪ Neutrik PowerCON
▪ Control Panel
(LCD Screen)
▪
▪
- Power : AC100V/AC120V/AC230V/AC240V,50Hz/60Hz
- Heater : 1,500 W
- Output : 20,000 cu.ft / min
- First Heat-up Time : 10 min
- Tank Capacity : 6 liter
- Fluid Consumption Rate : 8.3 min / liter (100% Output)
- Remote Included : W-1 Wireless Remote
- Optional Accessories : FW-500 Flight Case , W-515-HB Hanging Bracket
- Weight : 14 Kg
- Dimensions (mm) : L 561 W 278 H 186
- Wireless DMX is optional for both W-515 & W-530
- Liquid Used : Antari FLR / FLG Liquid
- Power : AC230V/AC240V,50Hz/60Hz
- Heater : 3,000 W
- Output : 40,000 cu.ft / min
- First Heat-up Time : 12 min
- Tank Capacity : 6 liter
- Fluid Consumption Rate : 5.3 min / liter (100% Output)
- Remote Included : W-1 Wireless Remote
- Optional Accessories : FW-500 Flight Case , W-515-HB Hanging Bracket
- Weight : 19 Kg
- Dimensions (mm) : L 581 W 278 H 186
- Wireless DMX is optional for both W-515 & W-530
- Liquid Used : Antari FLR / FLG Liquid
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades
the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in
an easier method.
Main Features:
1. Intelligent Wireless Control System
Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area.
2. Opto-electronic Fluid Sensor
When the fluid recipient runs dry, the fluid sensor stops pumping automatically to protect pump from burning.
3. More Efficient New Heat Exchanger Design
It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat
exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.
4. New Advanced PCB (Printed Circuit Board)
Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog
machines be able to work stably between – 20 and + 60 degree Celsius.
W-515 Specification
W-530 Specification
W-515 / W-530 Wireless Control Fog Machine