Antari ICE ORDERCODE 60620
Congratulations! You have bought a great, innovative product from Antari. The Antari Ice fogger brings excitement to any venue. You now own a rugged and powerful state-of-the-art machine. You can rely on Antari, for more excellent products. We design and manufacture professional equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied. You can get some of the best quality, best priced products on the market from Antari.
Antari Antari Ice Fogger™ Product Guide Warning..…...................................................................................………………………………………….. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. 2 2 3 Description..…..............................................................................……….………………………………… Features………………………………………………………………………………….………………….…. Overview…………………………………………………………………………………………………..…… 4 4 4 Installation.....
WARNING CAUTION! Keep this device away from rain and moisture! Unplug mains lead before filling the tank! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device have to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • • • • • • • • • • Only use the high-quality, water-based fog liquid, that your Antari dealer recommends.(5L fogger fluid ordercode 60603) Other fog liquids may cause poor effect fog, clogging and “spitting” of unevaporated liquid. Avoid flames and do not put close to flammable liquids or gases. Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit without liquid will cause damage to the pump and the heater.
Description of the device Features The Ice fogger is a versatile and powerful fogger from Antari. • 1040 W Heater • warm-up time approx. 4 min. • Fog output min. 230m3 Overview 1 3 2 Fig.
4 4) Screw for opening 8 kg ice cube tank 5) Output 6) Drainage outtake 5 6 Fig. 2 7) Fluid tank 2,5 L 8) Water pump ON / OFF 9) ON / OFF 10) IEC Power Connector 11) DMX input 12) DMX Dip Switches 13) DMX output 14) Remote Control 15) For linking 2nd unit 16) Water out 7 8 11 12 13 9 14 10 15 16 Fig.
Installation Installing the Fogger 1. Remove all packing materials from the fog machine. Check that all foam and plastic padding is removed, especially in the output area. 2. Place Low Fog Machine on a flat surface and remove fog liquid tank cap. 3. Fill the chamber with regular ice cubes or dry ice. The chamber can hold as much as 8 kg ice cubes (fig 4). 4. Fill with ANTARI Low Fog Liquid (ordercode 60603) or other high-quality water-based fog fluid. Any other types of fluid can damage the unit.
Remote Control Operation Z-8 : 10 meter wired remote controller can operate the ICE machine. Its three knobs allow the operator to customize fog machine functions by adjusting output duration, interval and output volume. 1. Adjust the duration of each fog emission (within the range of 1 to 15 seconds) by means of the DURATION control knob. 2. Adjust the interval between each fog emission (within the range of 10-255 seconds) by means of the INTERVAL control knob. 3.
DMX Setting for Z-series Low Fog Machines with onboard DMX Channel A 250-255 6 - 249 0–5 0 - 5 = OFF 6 – 249 = Volume Control ( 5% - 95%) 250 – 255 = Maximum Volume Output ( 100%) The ICE Low Fog Machines has onboard DMX control. Currently it uses one channel to control volume output operation. Each channel has a value range of 0 to 255. Timer functions such as duration and interval can be programmed using the DMX controller or the DMX control software being used by lighting and effects operator.
Maintenance The Ice fogger requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power. Do not allow the fog liquid to become contaminated.
Product Specification Model: Antari Ice Fogger Voltage: 230V-50Hz (CE) Power consumption: 1040W(230V) Fuse: F5A, 250V Warm-up time: approx. 4 min. Output: 230m3/min. Tank capacity : 2,5 L Dimensions 618x355x360mm (LxWxH) Weight: 24,4 kg Design and product specifications are subject to change without prior notice.
2009 Antari.
