User manual

2
Thank you for choosing the F-80Z. You now own a rugged and powerful state-of-the-art
machine. Prior to use, we suggest that you carefully read all of the instructions. By
following the suggestions found in this user manual, you can look forward to exceptional
performance from your Antari Fog Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long
and safe life for your fog machine.
CAUTIONS
Pay attention to all warning labels and instructions printed on the exterior of your
Antari Fog Machine
Danger of electric shock
" Keep this device dry.
" For inside use only. Not designed for outside use.
" For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take
care to determine that the unit is installed at the rated voltage.
" Always unplug your Antari Fog Machine before filling its tank.
" Keep fog machine upright.
" Turn off or unplug when not in use.
" This machine is not water- or splash-proof. If moisture, water, or fog liquid gets inside
the housing, immediately unplug the unit and contact a service technician or your
Antari dealer before using it again.
" No user serviceable parts inside. Refer to your Antari dealer or other qualified service
personnel.
Danger of burns
" For adult use only. Fog machine must be installed out of the reach of children. Never
leave the unit running unattended.
" Keep nozzle at least 50 cm (20 in.) away from contact with anything while in operation.
" The fog vapour at point of release is under pressure and is extremely hot .
" Never aim the output nozzle directly at people.
" Fog machine output is very hot. Avoid coming within 50 cm of the output nozzle during
operation.
" Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order
to guarantee adequate ventilation, allow a free air space of at least 20 cm around the
sides and top of the unit.
" Never aim the output nozzle at open flames.
SPECIFICATIONS
Power: AC 120V/60Hz 230V/50Hz
Heater: 700W
Fuse: 125V/7A 250V/3.15A
Warm-up time: 4 minutes
Output: 2500 cuft/min
Tank capacity: 0.7 litre
Dimensions: 333 x 160 x 130 mm
Weight: 4.5 kg