F-1 Fazer User Manual English © 2014 Antari Lighting and Effects Ltd.
User Manual - English Safety Information Please read the following safety information carefully before operating the machine. This information includes important safeguards about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printed on the machine. If you have questions about how to operate the machine safely, please contact your local Antari dealer for help. ․ Keep this device dry.
․ Only use Antari fluid. Other fluid may lead to heater clog and malfunction. ․ If the machine fails to work, unplug the machine and stop operation immediately. Contact your local Antari dealer for advise. ․ Before transporting the machine, make sure the fluid tank is completely drained. ․ Fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it securely. In case of eye contact or if fluid is swallowed, immediately look for medical advice.
Product Overview Blue LCD screen, Timer mode, Volume mode WDMX Wireless Solution XLR 5-Pin DMX Connector XLR 3-Pin DMX Connector Power ON / OFF Breaker Neutrik PowerCon Setting Up Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm open space around the machine. Step 2: Fill the fluid tank with Antari approved fluid. Step 3: Connect the machine to suitable rated power supply.
Step 5: To start making haze, press the VOLUME button on the control panel. Step 6: To turn off the machine, hold the STOP button for 3 seconds; the machine will automatically run a self-cleaning process and shut off after the process is done. Operation Control Panel Operation The machine can be operated with the onboard digital control interface.
Timer Output Set output volume at Timer mode from 1 to 100 % XXX % Volume Output Set output volume at Volume mode from 1 to 100 % XXX % Fan Speed Set fan speed from 20 to 100% XXX % DMX-512 Address: XXX Wireless XX Air Pump Sensor XX Set DMX/W-DMX address from 1 to 511 Turn On/Off Wireless Remote Control function Turn On/Off Air Pump Sensor DMX Mode XXXX Select DMX mode from 2ch, 1ch, and Sync mode W-DMX Power XX W-DMX Reset XXX Turn On/Off W-DMX function Unlink from a W-DMX transmitter Ru
DMX Connector Pin Assignment The machine provides a 3- or 5-pin XLR connector for DMX connection. The diagram below indicates pin assignment information. Pin Function 1 Ground 2 Data- 3 Data+ DMX Operation Making the DMX Connection – Connect the machine to a DMX controller or to one of the machines in the DMX chain. The machine uses a 3-pin or 5-pin XLR connector for DMX connection, the connector is located on the front of the machine. Address Setup – Use control menu to set DMX address.
DMX Channel Function Channel Mode Channel Value 0-4 Function Faze off 1 5-255 Faze 1-100% 2 0-4 Fan 20% 2 5-255 0-4 Fan 21-100% Faze off Fan 100% 1 1 5-255 Faze 1-100% Fan 100% 0-4 Faze Off Fan 20% Sync 1 5-255 Faze 1-100% Fan 21-100% Status of W-DMX connection (Optional) Symbol on the Liquid Crystal Display Status of W-DMX connection ● ◎ ⊙ ○ Transmitter assigned, DMX signal received Transmitter assigned, No DMX signal Transmitter link lost or linking to transmitter Transmitter not ass
*Transmitter With the transmitter, it is possible to make haze output via radio signal at maximum distance of 50 meters. Press the button “A” to produce haze output and press the button “B” to stop hazing. *Receiver If the optional wireless remote control function is selected and included, a radio signal receiver is tested and pre-attached on the machine. The included transmitter also has been paired with the attached receiver before shipping.
3. One machine can be controlled by up to 5 transmitters while one transmiter can be registered to unlimited number of machines. Service and Maintenance ․ Do not allow the machine and fluid to become contaminated. ․ Regularly fill distilled water to fluid tank and run the machine to clean the system. After cleaning, refill Antari fog fluids into fluid tank and make sure machine can produce fog properly.
C08F00100 12
