User manual

Antari W-510 DMX Fog Machine Settings
Channel A
0-128=OFF
129 - 255 = Maximum Volume Output (100%)
If Channel A has a value from 0 to 128, the unit is OFF.
Betweenthevalues129to255thevolumeoffogoutputisisat
maximum (100% output).
Note:
The W-510 Fog Machine has on-board DMX control (by DIP-Switch) except on
W-508.W-510uses1channeltocontrolon/offoperation.Eachchannelhasa
value range of 0 to 255. On/Off function can be programmed using the DMX
controller or the DMX control software being used by lighting and effects
operator.
In the example above, if the machine were assigned the DMX address of
130, Channel A would correspond to DMX address 130.
-08-