User manual

* Receiver:
* Functions and Setting:
Setting Example 1:
-Thereceiverispre-equippedfirmlyandtestedtoeachoftheW-508&W-
510(rearpanel),pleasedonottrytoremoveit.
1. All receivers can receive signals from any registered transmitter.
2. Each receiver is able to record at most 5 signals from the transmitter.
3. The included transmitter has been registered before shipment. User can
operate it directly without any start-up setting. The initial setting is
pressing button “A” which triggers the machine and pressing button “B”
can stop the fogging.
4. Ifuserdesirestouseothertransmitters(excepttheincludedoneinthe
shipment) to control machine, the setting must be completed within 15
seconds after switching on the machine otherwise it will leave
“transmitter setting mode” automatically.
ThereisaLEDlightontherearcontrolpanelofthemachine. Whenthe
machine is turned on, the LED green light will flash for 15 seconds. During
the 15 seconds interval, users can register signals for the transmitters. If
the registering signal of transmitter is well-received by the receiver, the
LED light will stop flashing and fixed green light will appear. If user desires
touse1transmittertocontrol2ormoremachinesatthesametime,user
has to turn on 2 (or more) machines altogether, and press the button “A”
of the transmitter within 15 seconds to set the signals.
5. Ifnoanyothernewtransmitterisregisteredwhenmachineisswitched
on, the memory of the receiver will remain the same record of the last
operation.
6. Please note if a new transmitter is registered when machine is switched
on, no matter how many new transmitters is registered (at most 5), all
previous transmitters registered record will be cleared (overridden)
-06-