User manual

children. Never leave the unit running unattended.
Never aim the output nozzle directly at people.
Fogmachineoutputisveryhot.Avoidcomingwithin50cmoftheoutput
nozzle during operation.
Locatethefogmachineinawell-ventilatedarea.Nevercovertheunit's
vents.Inordertoguaranteeadequateventilation,allowafreeairspaceofat
least20cmaroundthesidesandtopoftheunit.
Never aim the output nozzle at open flames.
If the supply cord is damaged, it must be replaced by manufacturer or its
serviceagentorsimilarlyqualifiedpersonnelinordertoavoidahazard.
The output nozzle becomes very hot during operation (200°C). Keep
flammable materials at least 50 cm away from the nozzle.
Always allow your ANTARI Fog Machine to cool down before attempting to
clean or service it.
Danger of Explosion
Use only high-quality, water-based fog liquid that your dealer recommends.
Other fog liquids may cause clogging or “spitting”.
Alwaysmakesurethereissufficientliquidinthetank.Operatingthisunit
without liquid will cause damage to the pump as well as over-heating of the
heater.
If your ANTARI W-508 or W-510 Fog Machine fails to work properly,
discontinue use immediately. Drain all fog liquid from the tank, pack the unit
securely (preferably in the original packing material), and return it to your
ANTARI dealer for service.
Always drain tank before mailing or transporting this unit.
Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid
comesincontactwithskinoreyes,rinsethoroughlywithwater.
Payattentiontoallwarninglabelsandinstructionsprintedonthe
exterior of your ANTARI Fog Machine.
Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog
liquid.
Note:
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to
operate the system has arrived intact.
The shipping carton should contain the following items:
1. One unit of W-508 or W-510 Fog Machine
2. Power cord
3. One Set of W-1 transmitter
4. User Manual
5. Mounting hanging brackets with washers/screws (for W-510)
-02-