User`s manual

SPECIFICATIONS
Input Connections: XLR-Female balanced or ¼-inch unbalanced
Output Connections: XLR-Male balanced and ¼-inch unbalanced
Frequency Response: 20 Hz – 20 kHz, +/-1dB (typical)
Dynamic Range: >104dB A-weighted
Tube Type Hand Selected 12AX7A (x1)
THD: <0.05% (typical)
CMRR: >60dB (typical)
Maximum Input Level: +16dBu (¼-inch), +15dbu (XLR), +16dBu (Insert)
Maximum Output Level: +18dBu (¼-inch), +24dbu (XLR), +16dBu (Insert)
Low Cut Filter: Switchable, –3dB @ 100 Hz
Input Impedance: 5.5k Ohm(balanced XLR), 1M Ohm(unbalanced ¼-inch)
Output Impedance: 600 Ohm(balanced XLR), 300 Ohm(unbalanced ¼-inch)
Maximum Gain: Switchable, +66dB (balanced in-out)
Phantom Power: Switch selectable, +48Volts DC, filtered, current limited
Chassis Type: Aluminum anodized with integral/stackable rubber sides
Power Requirements: 9VAC @ 700mA (typical)
9VAC @ 1000mA supply included with product
Dimensions: 1.75inch H x 5.9inch W x 6.5inch D
44.5mm x 150mm x 165mm
Weight: 2.5 lbs. (1.14 kg)
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement.
Therefore, specifications are subject to change without notice.
Go to www.artproaudio.com
for the latest information and on the Auto-Tune Pre.
Go to www.antarestech.com
for more information on Antares® and Auto-Tune®.
10