Owner`s manual

39
The Cut And
Copy Buttons
The Cut and
Copy buttons
become active whenever a pitch contour
object is selected. Cut removes selected
objects. Both Cut and Copy copy selected
objects to the Auto-Tune 5 clipboard. You can
then paste the objects elsewhere in the Pitch
Graph display.
The Paste Button
The Paste button becomes
active whenever an object
has been Cut or Copied to the
clipboard. Clicking Paste places the contents of
the clipboard in the center of the current Pitch
Graph view.
NOTE: Since only one pitch contour
object (line or curve) can exist at any
time point on the Pitch Graph, any
object(s) that previously existed at the time
where an object is Pasted will be deleted.
Hence, before you press Paste, be sure that
the Pitch Graph view does not contain any
pitch contour object(s) that you want to keep.
Keyboard Equivalents
Some host applications support the following
keyboard command equivalents for the
above Edit Buttons. Others reserve these
commands for their own use. Consult your
host application’s manual for details (or just try
them and see if they work).
Command/Control-Z Undo
Command-Shift-Z/Control-Y Redo
Command/Control-X Cut
Command/Control-C Copy
Command/Control-V Paste
Command/Control-A Select All
Pen Tablet Input
If you do a lot of your pitch correction using
Graphical Mode, you may want to consider
using a USB pen tablet like the Wacom
Graphire.
A pen tablet lets you control Auto-Tune 5’s
graphical tools (as well as all the other controls)
using a familiar pen-style input device. Once
you become comfortable with one (which
usually only takes a few minutes), a pen tablet
typically offers increased drawing accuracy
with less wrist stress in long sessions. Some
tablets also include programmable function
keys for often-used keyboard commands.