Owner`s manual

EQ #2 Page

EQ2 Peaking

f: 7725 Q:2.4 Gn:+12

This page allows you to select the type and set the parameters of the

second equalizer band. The available options are identical to EQ Band #1

described above.

EQ On Button

When this button is lit, the EQ module is active. When it is not lit, the

module is bypassed. Pressing the button toggles its state. The EQ On/Off

function can also be controlled by MIDI and/or by a footswitch.

Double Track Page

The AVP’s Double Track function let’s you create the effect of two not-

quite-identical versions of the same performance being played in unison.

These tracks can appear together at the main output or can be routed to

independent outputs for subsequent processing and mixing.

Double Track

Mono mix amount: 27%

If you want both the main and double track to appear at the Main Out-

put, use the Data Knob to select the amount of the double track you want

in the mix. The range is from 1% (double track barely audible), to 50%

(main and double track appear at the same volume).

If you want to send the main and double track to separate outputs, turn

the Data Knob counterclockwise until the following screen appears:

Double Track

Stereo

With this setting, the main track appears at the Main Output and the

double track appears at the Double Track Output.