Owner`s manual

53
De-esser On Button
When this button is lit, the De-esser module is active. When it is not lit, the
module is bypassed. Pressing the button toggles its state. The De-esser On/
Off function can also be controlled by MIDI and/or by a footswitch.
EQUALIZER/OUTPUT MODULE
EQ #1 Page
EQ1 Peaking
f: 7725 Q:2.4 Gn:+12
This page allows you to select the type and set the parameters of the first
of the AVP’s two bands of parametric equalization. Use the Data Knob to
select the type of equalization and then use the cursor buttons to move to
the various parameters available for that type.
The equalization types and their associated parameters are as follows:
EQ Off
EQ1 (off)
No equalization applied.
Low Shelf Filter
EQ1 Low Shelf
f: 1000 S:1.0 Gn: +6
The Low Shelf filter can be thought of as the world’s most flexible version
of the venerable “Bass” tone control familiar to users of radios, home
stereos and boom boxes.
The Low Shelf filter boosts or cuts all frequencies below cutoff frequency
“f” by the Gain (“Gn”) amount (in dB). Additionally, you can vary the
slope (“S”) of the shelf from 2dB/octave (S=0.3) to 12dB/octave (S=2.0).