Owner`s manual

46
Tune (i.e., the note name appears in the display, but the field under the
note is blank): When the input is near a note set to Tune, Auto-Tune
will retune the input to that note.
Bypass (i.e., the note name appears in the display and an “*” appears in
the field under the note): When the input pitch is close to a note set to
Bypass, the output remains uncorrected.
Blank (i.e., the note name disappears from the display): A note set to
Blank will be omitted from the scale. For example, setting C#, D#, F#,
G#, A# to Blank causes a C Major scale to remain. In that case Auto-
Tune would always retune the input to the closest note of the C Major
scale.
As an example, the following settings result in a D Major scale with no
pitch corrections applied to F# and C#:
D : C#D E F#G A B
Ma: * *
Why set Scale notes to “Blank”?
To understand why it is sometimes necessary to set even correct scale notes
to ”Blank,“ let’s look again at the example from Chapter 1.
10.0 10.5 11.0
D3
B2
C

3
ORIGINAL
PERFORMANCE
CORRECTED
BY AVP