Owner`s manual

Bad SysEx Data

Received

If this happens to you, check to be sure that you have sent the AVP the

correct file from your sequencer.

Restore Factory Presets Page

<Save> to restore

## Preset Name

If you have edited or replaced any of the factory presets and wish to

restore one or more of them, use the Data Knob to select the desired

factory preset. If you scroll to the end of the factory preset list you will

see the additional choice:

<Save> to restore

Restore all Presets

Once you have made your selection, press Save to see:

Are you sure?

<Save> to confirm

IMPORTANT NOTE: Restoring one or more factory presets will perma-

nently overwrite whatever presets are currently in the corresponding

preset locations. If you want to save those presets, either copy them to

a location which will not be overwritten or save them as a MIDI SysEx

file using the MIDI Preset Dump page described above.

If you have selected "Restore all Presets," the process will take about 9

seconds and you will see this screen during the save process:

Factory Presets

restore in progress.

If you have selected a single preset, the process is virtually instantaneous.