Owner`s manual

37
MIDI Preset Restore Enable Page
This page allows you to either enable or disable the AVP’s ability to receive
MIDI SysEx messages.
Enable MIDI SysEx
Reception: NO
When "NO" is selected, the AVP will ignore all MIDI SysEx messages.
When "Yes" is selected, the AVP will respond to any valid AVP SysEx files
created with the MIDI Preset Dump function described above.
To restore a previously saved file, select "Yes" on the above page and
ensure that the MIDI Out on your sequencer or computer is connected to
the AVP’s MIDI In.
On your MIDI sequencer, select the file that contains the Presets and/or
Setup data you wish to load. Play that file into the AVP.
IMPORTANT NOTE: Reloading one or more presets will permanently
overwrite whatever presets are currently in the corresponding numeri-
cal locations. If you want to save those presets, either copy them to a
location which will not be overwritten or save them as a MIDI SysEx file
using the MIDI Preset Dump page described above.
While the AVP is receiving and storing valid SysEx data, the following
screen will be displayed:
Receiving and
storing MIDI Data
When the load is completed, you will see the following screen for about 2
seconds:
MIDI Load
Complete
If the AVP detects a problem with the received SysEx data, the following
screen will be displayed: