Owner`s manual

<Save> For MIDI Dump

All Presets Only

This selection saves all of the AVP’s presets. When this file is loaded back

into your AVP, it will replace all of the AVP’s presets with the contents of

the file, but will leave the current Setup data unchanged.

<Save> For MIDI Dump

Setup Data Only

This selection saves only the AVP’s Setup data. When this file is loaded

back into your AVP, it will replace the current Setup data with the con-

tents of the file, and will leave all presets unchanged.

<Save> For MIDI Dump

## Preset Name

This selection saves the single selected AVP preset. When this file is loaded

back into your AVP, it will replace the preset currently at that numerical

location with the contents of the file, but will leave all other presets and

the current Setup data unchanged.

In any case, after pressing Save, the AVP will begin transmitting the

selected SysEx data and display the following screen:

Transmitting MIDI

Data

When the transmission is complete, you will see the following for about 2

seconds:

Transmission

Complete