Owner`s manual

31
As a result of Antares research into the unique characteristics of various
types of audio signals, the AVP Auto-Tune module offers a selection of
optimized processing algorithms for the most commonly pitch-corrected
inputs. Choices include Soprano Voice, Alto/Tenor Voice, Low Male Voice,
and Instrument. Matching the appropriate algorithm to the input results
in even faster and more accurate pitch detection and correction. Use the
Data Knob to select the desired Input Type.
NOTE: Choosing the wrong Input Type (or just forgetting to set it at all)
can result in compromised performance. Pay attention.
Auto-Tune Detune Page
Auto-Tune Detune
0 cents
The Detune parameter allows you to change the pitch standard of the
AVP’s Auto-tune module from the default A = 440Hz. The values are cents
(100 cents = a semitone). The range of adjustment is from -100 to +100
cents.
The Detune function can be used to tune a vocal performance to some
irreparably out-of-tune instrument (a piano or organ, for example), or to
allow correction to other than the conventional 440Hz standard.
Refer to the following table to convert cents to Hertz relative to 440Hz.
DETUNE SETTING A=HERTZ
-20 435
-16 436
-12 437
-8 438
-4 439
0 440
+4 441
+8 442
+12 443
+16 444
+20 445