Owner`s manual

38 OUTPUT GAIN Press this button to adjust the AVP’s output gain and/or

to engage the main bypass.

NOTE: While main bypass is engaged, no other controls will respond

until bypass is disengaged.

39 Output Level Meter This meter displays the AVP’s output level.

The Back Panel

1Main Line Output The AVP’s main audio output. It accepts a 1/4-inch TS

(tip-sleeve) phone plug.

2 Double Track Line Output If you have selected stereo double tracking,

the second track is available at this output. It accepts a 1/4-inch TS (tip-

sleeve) phone plug.

3 Line Input Accepts an unbalanced line level signal on a 1/4-inch TS (tip-

sleeve) phone plug.

NOTE: This input is NOT a microphone input. A line level signal is

required.

4MIDI OUT Connect to the MIDI Input of a MIDI sequencer to dump

Preset and Setup Data via MIDI SysEx.

5MIDI IN If you will be controlling your AVP via MIDI, connect the MIDI

Out from a MIDI sequencer, keyboard, or other MIDI source here.

Connect the MIDI Out from a sequencer to load previously saved SysEx

data files.

6 Footswitch Plug in a footswitch here. A 1/4-inch TS (tip-sleeve) plug is

required. There are two varieties of footswitches: those that are shorted

by default and those that are open by default. You should plug in your

footswitch and then power on the AVP. The AVP will detect which kind

of footswitch you have and behave accordingly.

The actual function of the footswitch is selected in the Setup Menu.

7 AC Power Input Plug the connector from the included power supply in

here. Do NOT use a supply which is not expressly intended for the AVP.

Bad things could happen.

1 2 3 4 5 6 7