Owner`s manual

23
The Compressor/Gate Module
20 COMP. Press this button to set the compressor’s ratio, threshold and
makeup gain.
21 ATTACK Press this button to set the compressor’s attack time.
22 RELEASE Press this button to set the compressor’s release time.
23 KNEE Press this button to set the compressor’s knee characteristic.
24 GATE Press this button to set the gate’s ratio and threshold.
25 Compressor Gain Reduction Meter This meter lights to indicate the
amount of gain reduction taking place.
26 ON When this button is lit, the Compressor/Gate module is active.
When it is not lit, the module is bypassed. Pressing the button toggles
its state.
The De-Esser Module
27 DE-ESS Press this button to set the de-esser’s ratio and threshold.
28 ATTACK Press this button to set the de-esser’s attack time.
29 RELEASE Press this button to set the de-esser’s release time.
30 HP Press this button to set the frequency of the de-esser’s highpass
filter.
31 De-esser Gain Reduction Meter This meter lights to indicate the
amount of gain reduction taking place.
32 ON When this button is lit, the De-esser module is active. When it is
not lit, the module is bypassed. Pressing the button toggles its state.
The Equalizer/Output Module
33 BAND 1 Press this button to select the type of equalization and the
parameter values for parametric EQ band #1.
34 BAND 2 Press this button to select the type of equalization and the
parameter values for parametric EQ band #2.
35 ON When this button is lit, both EQ bands are active. When it is not lit,
they are bypassed. Pressing the button toggles its state.
36 DOUBLE TRACK Press this button to select the type and amount of
automatic double tracking.
37 ON When this button is lit, double tracking is active. When it is not lit,
it is bypassed. Pressing the button toggles its state.