Owner`s manual

21
Chapter 3:
Panel Controls and Connectors
The Front Panel
1 Non-existent Power Switch That’s right. There isn’t one. The AVP is
designed to remain on continuously. You can, of course, plug it in to a
switched power strip or power conditioner if you like, but leaving it on
all the time will do it no harm.
2 LCD An easy-to-read 20 character by 2 line display. You can set the
optimum viewing angle in the Setup menu (See Chapter 4).
3 Data Entry Knob As the name implies, turn it to enter data.
The Master Module
4< (Left Cursor) Press this button to move the cursor to the left on
display pages with multiple data fields.
5> (Right Cursor) Press this button to move the cursor to the right on
display pages with multiple data fields.
6 SETUP Press this button to enter the Setup Menu. The button lights to
indicate that you are in Setup Mode. The Setup Menu contains the
settings that affect the AVP’s overall state (i.e., independent of the
currently selected Preset).
7 PAGE When in the Setup Menu, press this button to cycle sequentially
through the available edit pages. You can only move in one direction,
but there are so few pages in the Setup Menu that you are never more
than a few presses away from where you want to be.
1
2 3 4 5 11 12 18
25
31
35 39
2420 33 34
27
30
7
8
15 16 17 28
29
37
239
2610
13 14 19 21 22 32 36
38
6