Owner`s manual

37
Rate
Sets the rate of the vibrato over a range of 0.1 Hz to 10 Hz. The default Rate
setting is 5.5 Hz. Double-clicking or Command (Mac)/Control (PC) clicking
the Rate knob will reset it to that value.
Variation
Sets the amount of random variation that will be applied to the Rate and
Amount parameters on a note to note basis. Useful for humanizing the
vibrato by adding random “errors.”
The range is from 0 (no variation) to 100 (maximum variation). The default
Variation setting is 20. Double-clicking or Command (Mac)/Control (PC)
clicking the Variation knob will reset it to that value.
Onset Delay
Sets the amount of time (in msec) between the beginning of a note and
the beginning of the onset of vibrato. The range is from 0 to 1500ms (1.5
seconds). The default value is 500ms. Double-clicking or Command (Mac)/
Control (PC) clicking the Onset Delay knob will reset it to that value.
Onset Rate
Sets the amount of time (in msec) between the end of the Onset Delay
(set above) and the point at which the vibrato reaches the full Amounts set
in the Pitch, Amplitude and Formant Amount settings. The range is from
0 to 1500ms (1.5 seconds). The default value is 500ms. Double-clicking or
Command (Mac)/ Control (PC) clicking the knob will reset it to that value.