User`s manual

6. Use the Zoom/Select tool to drag a selection of “-gether” in the Enve-

lope Graph. The result will be something like the following:

7. Click the Make Curve button. Auto-Tune 3 will compute a new yellow

curve object from the existing pitch data. (The new curve may be

difficult to see at first because it will exactly overlay the red curve.) Click

the Zoom/Select tool on the background of the Envelope Graph to

cancel the area selection.

8. Both anchor points of the new curve will be selected. Select the Pointer

Tool and click precisely on the left end of the curve to select only the

left anchor point (you’ll know you’re over the anchor point when the

cursor changes to the four-pointed arrow cursor). Drag this straight up,

stretching the curve so it is centered around the D3 graph line. (If you

press Option/Alt on your keyboard before clicking the anchor point,

your movement will be constrained to the vertical, assuring that you

maintain the time relationship of the curve.)

9. Move the Pointer Tool over the body of the yellow curve so that the

cursor changes to the horizontal bar. Press and hold Option/Alt on your

keyboard (to constrain movement to the vertical) and click and drag the

curve straight down so it is centered on the C3 graph line. The Pitch

Graph should now appear as follows:

40-54 AT3 man layout RGB 03/05/2001, 1:32 pm46