User`s manual

42
Tutorial 2: Graphical Mode
This tutorial will introduce you to the basic Graphical Mode functions,
again using the “A2-A3-A2 sweep” file from Tutorial 1.
Begin the tutorial by doing the following:
1. Load or import “A2-A3-A2 sweep” into a track of your host program.
Play the track so that you are familiar with the original audio.
2. Set up Auto-Tune 3 to be an insert effect on that track.
3. Set Auto-Tune 3 to Automatic Mode.
4. Set the Key to “A” and the Scale to “Major.”
5. Set Auto-Tune 3 to Graphical Mode.
6. Click the Track Pitch button.
7. Play the sweep signal through Auto-Tune 3.
8. Stop playback (depending on your host application, you may also have
to click the Track Pitch button again to stop the tracking function).
A red curve will appear in the Pitch Graph. This is the pitch contour of the
sweep signal.
To Continue:
1. Select the Zoom/Select tool and drag out a box on the Pitch Graph that
encloses the red curve. The result will be something like the following:
40-54 AT3 man layout RGB 03/05/2001, 1:31 pm42