User`s manual

30
Correct Pitch
After you have used the graphical tools (as described below) to create a
target pitch contour, this button is used to apply the pitch correction to
the audio.
In all cases, pressing the Correct Pitch button and then starting playback
will cause the pitch correction to be applied to the audio. In some host
applications, starting playback when the Pitch Graph contains any yellow
pitch correction contour will automatically engage the Correct Pitch
function. Check your Auto-Tune 3 Read Me file for details.
Set Buffers
Set Buffers controls the number of seconds of memory buffer space that
are permanently reserved for pitch tracking and pitch correction data.
(There is a separate buffer for each plug-in occurrence.) To change the
buffer allocation, click on the Set Buffers data field and enter the required
amount into the resulting dialog box.
Note: As buffer memory is typically allocated from within your
host application, for large buffers, it may be necessary to
increase the memory allocation of your host.
Another Note: Some host applications allow Auto-Tune 3 to
display all tracked pitch information at their correct times
within the track (see the Auto-Tune 3 Read Me file for details).
If your application supports this capability, setting the buffer to
the length of the entire song and tracking the pitch in one pass
will allow you to quickly and easily move to each section of
audio to be corrected as necessary.
01-39 AT3 man layout RGB 03/05/2001, 1:31 pm30