User`s manual

Graphical Mode Controls

The Playback Controls

Track Pitch

The Track Pitch function is used to detect the pitch of the

audio to be processed so that it can be displayed on the

Pitch Graph Display.

Locate the desired audio and press the Track Pitch button. Its

“LED” will flash to indicate that Auto-Tune is waiting for

audio. Next, start playback of the audio. (The Track Pitch LED

will light steadily.) When all of the audio you want to correct

has played, stop playback. Track Pitch is automatically

deactivated and the detected pitch is displayed on

Note: If the length of the audio to be processed exceeds the

currently set size of the buffer (see below), playback will stop

when the buffer is full. If this happens, increase the buffer size

as necessary.

01-39 AT3 man layout RGB 03/05/2001, 1:31 pm29