User Manual

30
If you click the Assign button and then realize
that you forgot to type a name for your preset,
you can still click the name field and type a
name before clicking a preset button to assign
the preset.
If you click the Assign button and then, for
some reason, change your mind, simply click it
again to exit Assign mode.
To edit an existing preset:
1. Click the existing preset’s button to call up
its control settings and place its name in
the Name field.
2. Edit the controls as desired.
3. Click the Assign button and then the
preset’s button. The updated values will be
recorded and the preset’s name will remain
the same. Optionally, you can modify the
preset name (which will already be in the
Name field) before assigning the edited
preset to the button.
To create a new preset based
on an existing preset:
1. Click the existing preset’s button to call up
its control settings and place its name in
the Name field.
2. Edit the controls as desired.
3. Click in the Name field and type a name for
the new preset.
4. Click the Assign button and then the preset
button to which you want to assign the
new preset.
A TIP: Don’t forget to change the
name of the new preset before
assigning it to a button. Otherwise
you’ll end up with two identically named
presets with different control values. Not good.
To delete an existing preset:
1. Click the Presets Delete button
2. Click the button whose preset you want
to delete. The selected preset will be
erased and its button will return to the gray
unassigned state.
IMPORTANT NOTE: Harmony Presets
are local to the instance of Harmony
Engine Evo in which they are created.
If you want to share a set of Harmony Presets
among various instances of Harmony Engine
Evo, save the plug-in state as a preset in your
host so that it can then be recalled as a starting
point in any instance of Harmony Engine Evo.