User Manual

7
Chapter 3: Harmony Engine Evo Controls
This chapter is a reference for all of the controls used in the Harmony Engine Evo interface.
Controls
Continuous controls in Harmony Engine Evo are
represented by virtual knobs or faders.
Knobs can be controlled by either vertical or
horizontal movement:
VERTICAL: Position the cursor over a knob,
press and hold the left mouse button (or
the only mouse button, if you’re using a
one-button mouse) and move the cursor
up to turn the knob clockwise or down
to turn the knob counterclockwise. The
current value of the knob’s parameter
appears in its associated numeric display.
HORIZONTAL: Position the cursor over
a knob, press and hold the left mouse
button and move the cursor to the right
to turn the knob clockwise or to the left
to turn the knob counterclockwise. The
current value of the knob’s parameter
appears in its associated numeric display.
For faders, simply click on the “thumb” of the
fader and move it to the desired setting.
Option (Mac)/Control (PC)-clicking a control
returns it to its default value.