User Manual

54
Gain
The Gain
control lets
you set the
amount of
boost or cut
that will be
applied to
the aspiration
noise component at the selected Frequency.
The range is from -12.0dB to +12.0dB.
To adjust Gain, click on the knob and move the
cursor up to turn the knob clockwise, or down
to turn it counterclockwise.
Command (Mac)/Alt (PC) clicking on the knob
will reset it to its default value of 0.0
Usage Tips
•
If you’ll be using any of the more radical
AVOX  plug-ins on a voice, ASPIRE Evo
should come first in the signal chain (or
second, if you will also be using SYBIL Evo).
•
As in many of the AVOX  plug-ins, we’ve
provided control ranges that allow you to
create eects well beyond what would
normally be considered “realistic.” In
particular, large Increase amounts in
combination with high Gain and Q at various
frequencies can result in some rather
unusual eects.
•
As mentioned above, ASPIRE Evo will only
have an audible eect if a voice actually
contains natural aspiration noise. If you
are working with one of those rare super-
pure voices and need to add an element
of breathiness, use the Add Breathiness
function in THROAT to a add synthesized
simulation of aspiration noise.