User Manual

38
Display
The EQ Section Display provides a real-time
graphic representation of the Control Signal
(red plot), the Audio Signal (blue plot) and the
EQ curve (green plot).
OUTPUT MIXER SECTION
Here’s where you can set the output levels and
pans of both the processed Audio Signal and
the Control Signal.
Audio Signal
Level
This control
applies gain or
attenuation to
the processed
Audio Signal plus
Noise (if any).
The range is
from -inf (i.e., o) to +12 dBs of gain.
The associated meter indicates the level of the
processed Audio Signal along with a clipping
indicator. Between the eects of the modeling
process and the EQ, it is possible to generate
quite a bit of additional gain. If necessary, adjust
the output level so that clipping is avoided.
To adjust Audio Signal Level, click on the knob
and move the cursor up to turn the knob
clockwise, or down to turn it counterclockwise.
The numeric display will indicate the amount of
attenuation or gain in dBs.
Command (Mac)/Control (PC)/Option (Pro
Tools) clicking on the knob will reset it to its
default value of 0 dB.
Audio Signal
Pan
This slider allows
you to set the
Audio Signal’s
location in the
stereo spectrum.
NOTE: Audio Signal Pan only
functions in Stereo or Mono ->
Stereo versions of ARTICULATOR
Evo. If you have instantiated a Mono
version, the slider will be disabled.
Command (Mac)/Control (PC)/Option
(Pro Tools) click the control to reset it to
its default value of 0 (absolute center).
Control Signal Level
This control applies gain or attenuation to the
Control Signal. The range is from -inf (i.e., o)
to +12 dBs of
gain.
The associated
meter indicates
the level of
the Control
Signal along
with a clipping
indicator. If
necessary, adjust the output level so that
clipping is avoided.
To adjust Control Signal Level, click on
the knob and move the cursor up to turn
the knob clockwise, or down to turn it
counterclockwise. The numeric display will
indicate the amount of attenuation or gain in
dBs.
Command (Mac)/Control (PC)/Option (Pro
Tools) clicking on the knob will reset it to its
default value of -inf (o)
Control Signal
Pan
This slider allows
you to set the
Control Signal’s
location in the
stereo spectrum.