User Manual

30
Attack Time
This control adjusts the speed with which
SYBIL Evo’s compressor responds to peaks in
the signal coming from the high pass filter. The
range of the control is from 3 milliseconds to
100 milliseconds.
Command (Mac)/Control (PC)/Option (Pro
Tools) click the control to reset it to its default
value of 10 milliseconds.
Release Time
This control adjusts the time it takes the
compressor’s gain to increase 6 dB after the
signal coming from the high pass filter drops
below the threshold. The range of the control
is from 3 milliseconds to 200 milliseconds.
Command (Mac)/Control (PC)/Option (Pro
Tools) click the control to reset it to its default
value of 20 milliseconds.
Usage Tips
•
SYBIL Evo functions solely as a mono
processor.
•
If the high pass frequency is set too low,
non-sibilant components of the signal will
be compressed and the vocal will have its
highs attenuated. If it is set too high, some
sibilance will still remain. The trick is to find
that ideal point where only the sibilance is
aected. When set correctly, you can’t tell
that there is processing going on. If you can
hear something happening, SYBIL Evo needs
to have its settings tweaked.