User Manual

73
8. Click the Import Auto button. Auto-Tune 8
will compute a new blue curve object from
the existing pitch data as well as a green
output curve:
PITCH DRAWN TO NEIGHBORING NOTES
Assuming that this entire phrase should
be centered around E3, there are several
problem spots, indicated above, where the
pitch is being incorrectly adjusted towards
neighboring tones.
9. To hear the pitch corrections that would
be produced in Automatic Mode, set the
Graphical Mode Retune Speed to 0 (which
will cause the green output curve to
exactly match the blue object curve). Play
back the file.
10. Switch to the Automatic Mode and click
the Remove buttons next to C, D, F, A, and
B.
11. Return to the Graphical Mode and use the
I-Beam tool to drag out a selection in the
Envelope Graph, as in Step 7.
12. Press the Import Auto button. Auto-Tune
8 will compute new blue and green curves
from the existing pitch data:
Note how the pitch errors from the previous
curve have been removed. Also, note the
raised pitches indicated above. This occurs
because the Automatic Mode Retune slider
value of 20 is slow compared to the rapidly
increasing pitch that is occurring at that point
in time. But even with the raised pitches, the
average output pitch is centered on E3 and the
phrase sounds in tune.