User Manual

65
To continue:
1. Set the Retune Speed to about 30.
2. Play “A2-A3-A2 sweep” again. Compare the
30 setting to the  setting.
3. Try various other Speed settings.
The setting of  is fast: Auto-Tune 8 makes
instantaneous pitch changes. The setting
of 30 is slower. Auto-Tune 8 makes gradual
pitch changes. This parameter controls how
rapidly the pitch correction is applied to the
incoming pitch. The units are milliseconds. A
value of zero will cause instantaneous changes
from one tone to another and will completely
suppress a vibrato (note that related volume
changes will remain). Retune values from 10 to
50 are typical for vocals.
To continue:
1. Set the Retune Speed to 
2. In the Edit Scale Display, click the Remove
buttons next to all the notes except F#.
3. Play “A2-A3-A2 sweep” again. As the sound
is playing, move Scale Detune knob.
The output pitch will be locked to F#, however,
you will hear the output pitch change with the
Detune slider movement. This is because the
Detune knob is changing the pitch standard of
the scale.
Finally:
1. Select “sine wave” from the Vibrato Type
pop-up.
2. Play “A2-A3-A2 sweep” again.
3. Experiment with the various vibrato
controls to hear their eects.