User Manual

43
Show MIDI
When the Show
MIDI button is
blue, any MIDI data
that has previously
been recorded will
be displayed as red
boxes on the Pitch Graph. Clicking the Show
MIDI button will toggle its state.
NOTE: The red MIDI notes display is
for reference only. Unless you choose
to make Note Objects from the MIDI
notes as described below, the MIDI notes will
have no effect on Auto-Tune 7’s pitch correction.
Make Notes From MIDI
Clicking the Make Notes From MIDI button will
convert any currently recorded MIDI notes into
Note Correction Objects.
NOTE: If a range of time has been
selected using the I-Beam Tool, the
Make Notes From MIDI button works
only in the selected time range. Otherwise it
works on all red MIDI data.
Since the assumption is that you will create
your MIDI track with your desired timing, the
recorded MIDI notes are not affected by the
time manipulation tools. As a result, if you will
be performing time correction on your audio
in a range where you will be using the Make
Notes From MIDI function, you should use the
following workflow:
1. Create a MIDI track with the desired timing
and route it to Auto-Tune 7.
2. Track Pitch + Time (which also records the
MIDI data).
3. If necessary, click the Show MIDI button to
display the recorded MIDI notes.
4. Use the time tools described later in this
chapter to adjust the timing of your audio
to match the timing of the displayed MIDI
notes.
5. Click the Make Notes From MIDI button to
convert the MIDI notes in Note Correction
Objects that will now be in perfect sync
with your audio.