Specification Sheet

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira SFP-S10-T Industrial-Grade Gigabit Ethernet SFP Transceiver, Single-Mode, 10 km Distance, -40 to 85°C Wide Operating Temperature, 5-Year Warranty

SFP-S10-T

1.25 Gigabit Ethernet-Single Mode Transceiver

Page 1 of 6

www.antaira.com

SFP, Duplex LC Connector, 1310nm FP LD for Single Mode Fiber, RoHS Compliant

Features

• 1310nm FP LD

• Data Rate: 1.25Gbps, NRZ

• Single +3.3V Power Supply

• RoHS Compliant and Lead-free

• AC/AC Differential Electrical Interface

• Compliant with Multi-Source Agreement

(MSA) Small Form Factor Pluggable (SFP)

• Duplex LC Connector

• Compliance with specifications for

IEEE-802.3z Gigabit Ethernet at 1.25 Gbps

• Compliance with ANSI specifications for Fiber

Channel applications at 1.06 Gbps

• Eye Safety

Designed to meet Laser Class 1, complies

with EN60825-1

Applications

• Gigabit Ethernet Links

• Fiber Channel Links at 1.06 Gbps

• High Speed Backplane Interconnects

• Switched Backbones

Description

The SFP-S10-T from AAXEON is the high performance and cost-effective module for serial optical

data communication applications specified for single mode of 1.25 Gb/s. It operates on +3.3V power.

The module is intended for single mode fiber, operates at a nominal wavelength of 1310nm, and

complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module

consists of a transmitter optical subassembly, a receiver optical subassembly, and an electrical

subassembly. All are housed in a metal package and the combination produces a reliable component.

The module is a duplex LC connector transceiver designed for use in Gigabit Ethernet applications

and to provide IEEE-802.3z compliant link for 1.25Gb/s intermediate reach applications. The

characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

EMC

Most equipment utilizing high-speed transceivers will be required to meet the following

requirements:

1) FCC in the United States

2) CENELEC EN55022 (CISPR 22) in Europe

To assist the customer in managing the overall equipment EMC performance, the transceivers have

been designed to satisfy FCC class B limits and provide good immunity to radio-frequency

electromagnetic fields.

Eye Safety

The transceivers have been designed to meet Class 1 eye safety and comply with EN 60825-1.

RoHS

Summary of content (6 pages)

PAGE 1
SFP-S10-T 1.25 Gigabit Ethernet-Single Mode Transceiver SFP, Duplex LC Connector, 1310nm FP LD for Single Mode Fiber, RoHS Compliant Features Applications • Gigabit Ethernet Links • Fiber Channel Links at 1.06 Gbps • High Speed Backplane Interconnects • Switched Backbones RoHS Pb • 1310nm FP LD • Data Rate: 1.25Gbps, NRZ • Single +3.
PAGE 2
SFP-S10-T 1.25 Gigabit Ethernet-Single Mode Transceiver Product Information Model Number SFP-S10-T Operating Voltage & SD Output 3.3V TTL AC/AC Distance 10 km LD Type & Wavelength 1310 nm FP Output Power Sensitivity -9.5 ~ -3 dBm ≤-21 dBm ABSOLUTE MAX RATINGS PARAMETER Storage Temperature Supply Voltage Data Input Voltage Supply Current SYMBOL TS VCC --IS MIN -40 0 0 SYMBOL TA VCC VID MIN. -40 3.
PAGE 3
SFP-S10-T 1.25 Gigabit Ethernet-Single Mode Transceiver RECEIVER ELECTRO-OPTICAL CHARACTERISTICS PARAMETER Maximum Input Optical Power Minimum Input Optical Power Operating Wavelength Optical Return Loss SYMBOL Pmax Pmin λ ORL Receiver Electrical 3dB Upper Cutoff Frequency --- LOS of Signal - Asserted LOS of Signal - Deasserted Loss of Signal -Hysterisis PA PD PD -PA MIN -3 TYP. MAX -21 1600 1100 12 UNIT dBm dBm nm dB 1500 MHz -20 dBm dBm dB -35 0.5 NOTE 4 4 Notes: 1.
PAGE 4
SFP-S10-T 1.25 Gigabit Ethernet-Single Mode Transceiver BLOCK DIAGRAM OF TRANSCEIVER Electrical Sub-assembly TD+ TD- LD Driver LD TX Disable TX Fault (0) (1) (2) MOD_DEF Optical Sub-assembly Duplex LC Receptacle RD+ RD- Post-Amp PreAmp RX_LOS Page 4 of 6 www.antaira.
PAGE 5
SFP-S10-T 1.
PAGE 6
SFP-S10-T 1.25 Gigabit Ethernet-Single Mode Transceiver RECOMMENDED CIRCUIT SCHEMATIC Vcc VEET VCCT RES Tx Fault RES Tx Disable 100 LD Driver TD+ Z o = 50 Ω TD- Z o = 50 Ω Vcc L1 VCCT C2 L2 VCCR Pre Amp Post Amp C3 C1 RD- Z o = 50 Ω RD+ Z o = 50 Ω System 100Ω Vcc RES RES RES EEPROM RES RX_LOS MOD-DEF(2) MOD-DEF(1) MOD-DEF(0) Note : 4.7 K Ω < RES < 10 KΩ L1, L 2 = 1mH C1 = 10mF C 2, C 3 = 0.1mF MECHANICAL DIMENSIONS Units in mm All dimensions are ±0.