Specification Sheet

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira SFP-100M Industrial-Grade, Fast Ethernet SFP Transceiver, Multi-Mode, 2 Kilometer Distance, 5-Year Warranty

SFP-100M

155Mbps ATM-Multimode Transceiver

Page 1 of 5

www.antaira.com

SFP, Duplex LC Connector, 1310nm LED/FP for Multimode Fiber, RoHS Compliant

Features

• 1310nm LED/FP

• Data Rate: 155Mbps, NRZ

• Single +3.3V Power Supply

• RoHS Compliant and Lead-free

• AC/AC Differential Electrical Interface

• Compliant with Multi-Source Agreement (MSA)

Small Form Factor Pluggable (SFP)

• Duplex LC Connector

• Compliance with 100Base-FX of IEEE802.3u

Standard

• Compliance with FDDI PMD Standard

• Compliance with ATM Standard

Applications

• Fast Ethernet

• FDDI

• ATM/SONET OC-3/SDH STM-1

• Multimode fiber links

•

Optical-Electrical Interface Conversion

Description

The SFP-100M from AAXEON is the high performance and cost-effective module for serial optical

data communication applications specified for multimode of 155 Mb/s. It operates on +3.3V power. The

module is intended for multimode fiber, operates at a nominal wavelength of 1310nm, and complies with

Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a

transmitter optical subassembly, a receiver optical subassembly, and an electrical subassembly. All of

are housed in a plastic package and the combination produces a reliable component.

The module is a duplex LC connector transceiver designed to provide an ATM/SONET OC-3/SDH

STM-1 compliant link for 155 Mb/s short reach applications. The characteristics are performed in

accordance with Telcordia Specification GR-468-CORE.

EMC

Most equipment utilizing high-speed transceivers will be required to meet the following

requirements:

1) FCC in the United States

2) CENELEC EN55022 (CISPR 22) in Europe

To assist the customer in managing the overall equipment EMC performance, the transceivers have

been designed to satisfy FCC class B limits and provide good immunity to radio-frequency

electromagnetic fields.

Eye Safety

The transceivers have been designed to meet Class 1 eye safety and comply with EN 60825-1.

RoHS

Summary of content (5 pages)

PAGE 1
SFP-100M 155Mbps ATM-Multimode Transceiver SFP, Duplex LC Connector, 1310nm LED/FP for Multimode Fiber, RoHS Compliant Features Applications • • • • • Fast Ethernet FDDI ATM/SONET OC-3/SDH STM-1 Multimode fiber links Optical-Electrical Interface Conversion RoHS Pb • 1310nm LED/FP • Data Rate: 155Mbps, NRZ • Single +3.
PAGE 2
SFP-100M 155Mbps ATM-Multimode Transceiver Product Information Model Number SFP-100M Operating Voltage & SD Output 3.3V TTL AC/AC Distance Wavelength Output Power Sensitivity 2 km 1310 nm -19 ~ -14 dBm ≤-32 dBm ABSOLUTE MAX RATINGS PARAMETER Storage Temperature Supply Voltage SYMBOL TS VCC MIN -40 0 SYMBOL TA VCC VID MIN. 0 3.1 400 MAX 85 6 UNIT °C V NOTE OPERATING CONDITIONS PARAMETER Case Operating Temperature Supply Voltage Data Input Voltage Swing TYP. MAX. 70 3.
PAGE 3
SFP-100M 155Mbps ATM-Multimode Transceiver RECEIVER ELECTRO-OPTICAL CHARACTERISTICS PARAMETER Maximum Input Optical Power Receiver Sensitivity Operating Wavelength Loss of Signal - Asserted Loss of Signal - Deasserted Loss of Signal -Hysterisis SYMBOL Pmax Pmin λ PA PD PD- PA MIN -14 TYP. MAX -34 -32 1600 1100 -45 -31 0.5 UNIT dBm dBm nm dBm dBm dB NOTE 2 2 Notes: 1. Measured average power coupled into 62.5/125μm, 0.275 NA graded index multimode fiber. 23 -10 2.
PAGE 4
SFP-100M 155Mbps ATM-Multimode Transceiver PIN OUT DIAGRAM OF TRANSCEIVER 20 VEET 1 VEET 19 TD- 2 Tx Fault 18 TD+ 3 Tx Disable 17 VEET 4 MOD-DEF2 16 VCCT 5 MOD-DEF1 15 VCCR 6 MOD-DEF0 14 VEER 7 Rate Select 13 RD+ 8 LOS 12 RD- 9 VEER 11 VEER 10 VEER Top of Board Buttom of Board (As Viewed through Top of Board PIN OUT TABLE Pin Symbol Functional Description 1 VeeT Transmitter Ground 2 TX Fault Transmitter Fault Indication (Not Connected) 3 TX Disable Transm
PAGE 5
SFP-100M 155Mbps ATM-Multimode Transceiver RECOMMENDED CIRCUIT SCHEMATIC Vcc RGND VCCT RES Tx_Fault RES Tx_Disable 100 LD Driver +Tx_DAT Z o = 50 Ω -Tx_DAT Z o = 50 Ω Vcc L1 VDDT C1 L2 VDDR Pre Amp Post Amp C5 C4 -Rx_DAT Z o = 50 Ω +Rx_DAT Z o = 50 Ω 100Ω RES RES RES RES EEPROM System Vcc TGND Rx_LOS C2 C3 MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) Note : 4.7 KΩ < RES < 10 KΩ L1, L 2 = 1mH C 2, C 4 = 10 mF C1, C 3, C 5 = 0.