User Manual

15
Technical Specification
The LNX-800AG - 8-Port Industrial Gigabit Unmanaged Ethernet Switch technical
specifications are shown below.
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-Tx Gigabit Ethernet
IEEE802.3x Flow Control and Back Pressure
Protocol
CSMA/CD
Transfer Rate
14,880pps for 10Base-T Ethernet port
148,800pps for 100Base-TX Fast Ethernet port
1,488,000pps for Gigabit Ethernet Port
Transmission Distance
Up to 100M
Transmission Speed
Up to 1000Mbps
Broadcast Storm Rate
Limit
3,965pps (default)
MAC Address
8K Table size
RJ45 Port
8*10/100/1000BaseT(X) auto negotiation
speed, Full/Half duplex mode, and auto
MDI/MDI-X connection
LED
Unit: P1, P2, Fault
Ethernet port: Link/Active (100Mbps)
Link (1000Mbps)
Over Current Protection
Single-Blown Fuse
Power Input
Redundant Power DC 48 ~ 55V with Connective
1*6-Pin Removable Terminal Block
Fault Output
1 Relay Output
Max Power Consumption
7.788 Watts