User Manual

Antaira Industrial Ethernet Switches
LNX-0601G-SFP Series User Manual V1.2
18
7 Technical Specification
Table 7.1 has the technical specifications for Antaira’s LNX-0601G-SFP series: 6-port industrial
gigabit unmanaged Ethernet switch with 5*10/100/1000Tx and 1*100/1000 SFP slot.
Standard
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX fast Ethernet
IEEE 802.3ab 1000BaseT
IEEE 802.3az Energy Efficient Ethernet (EEE)
Protocol CSMA/CD
Transfer Rate
14,880pps for Ethernet port
148,800pps for fast Ethernet port
1,488,000pps for gigabit Ethernet port
Transmission Distance Up to 100M (Fast Ethernet)
Transmission Speed Up to 1000Mbps
MAC Address 8K table size
RJ45 (Ethernet) Port
5*10/100/1000Tx auto negotiation speed, full/half
duplex mode, and auto MDI/MDI-X connection
SFP slot
1*SFP slot; supports dual rate 100/1000
LED
Power Unit: P1 (Green), P2 (Green), Fault (Red)
Ethernet port: Link/Active (Green), 1000Mbps
SFP: Link/Active (Green)
Over Current Protection Single-blown fuse
Power Input
Redundant Power DC 12~48V with connective
1*6-Pin removable terminal block
Fault Output 1 relay output
Max Power Consumption 6.9 watts
Installation DIN rail mounting, wall mounting (Optional)
Operating Temperature
Standard: -10
o
C to 60
o
C (14° to 140° F)
EOT: -40
o
C to 75
o
C (-40° to 167° F)
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40
o
C to 85
o
C (-40°F ~ 185°F)
Case Dimension IP-30, 30mm (W) x 99mm (D) x 142mm (H)